International Journal

In this paper, a 10 W ultra-broadband GaN power amplifier (PA) is designed, fabricated, and tested. The suggested design technique provides a more accurate starting point for matching network synthesis and better prediction of achievable circuit performance. A negative-image model was used to fit the extracted optimum impedances based on source-/load-pull technique and multi-section impedance matc

This paper presents a planar inverted-F antenna (PIFA) for ultra-wide band (UWB) communication, which is printed on a dielectric substrate of FR4-epoxy with 4.4 relative permittivity (?r), 2 mm thickness. This antenna is designed to be used in a 2.9?10.7 GHz frequency band, and a very wide bandwidth is realized by the addition of a parasitic element and a J-shaped slot to the PIFA. The effects of

This paper presents the design of an eight-element 60 GHz phased-array receiver chip with interference mitigation capability, fabricated in 0.25 ?m SiGe BiCMOS technology. Each receiver element contains a low noise amplifier (LNA) and a vector-modulator that supports high-resolution amplitude and phase control. A fully differential power combining network follows the eight elements. The chip also

Radio frequency (RF) and microwave amplifier research has been largely focused on solid-state technology in recent years. This paper presents design and performance characterization of a 50-kW modular solid-state amplifier, operating at 505.8 MHz. It includes architecture selection and design procedures based on circuit and EM simulations for its building blocks like solid-state amplifier modules,

This paper focuses on the design of a telemetry antenna system intended for small satellites. It provides an axial ratio (AR) lower than 3 dB over ±60° conical space angle with over 20% of bandwidth. The antenna consists of a multilayer patch element fed by a wideband feeding circuit. The latter is an appropriate adjustment of 90° hybrid couplers and 180° ring coupler. We show that this design pro

In this paper, the far-field pattern of a Cassegrain reflector is formulated. A novel illumination function is used to approximate the field distribution at the aperture of the reflector. The defined illumination function takes into account the central aperture blockage created by the subreflector. Using the illumination function, a closed-form expression describing the far-field radiation pattern