International Journal

An analysis about the effects of various bi-isotropic (BI) coatings and BI background media upon the gain characteristics of an axially slotted cylinder using numerical simulations is presented. It is investigated that chirality and Tellegen parameters of a coating and a background medium play a significant role in modifying the gain properties. It is further studied that an axially slotted cylind

A novel miniaturized dual-mode bandpass filter (BPF) using hexagonal loop resonator is presented. In order to reduce the circuit size, capacitive loading structure is applied to enhance the self-capacitance and electrical length of the hexagonal loop resonator. The frequency selectivity and out-of-band rejection of the proposed BPF can be improved by the two inherent transmission zeros in each sid

In this paper, a 2.45-GHz wideband harmonic rejection rectenna for wireless power transfer is proposed. The rectenna comprises a microstrip-fed circular ring slot antenna (CRSA) and a series-parallel rectifier (SPR). A compact micro strip resonant cell is inserted into the CRSA so that the harmonic suppression over a wide bandwidth (3?8 GHz) can be obtained. The radio-frequency (RF)?DC conversion

Design method for band-stop filters (BSFs) that suppress a requested number of spurious bandstops and reduce ripples in the passbands below ~1 dB is proposed. BSF is designed in a form of a cascade of cells, each consisting of steps of equal electrical length, where the number of steps is used to control the number of suppressed spurious bandstops. Analytical formulas are developed that enable ini

In this work, an electromagnetic (EM) model and a small-signal (lumped-element) model of a wafer-level encapsulated (WLE) radio frequency microelectromechanical systems (RF-MEMS) switch is presented. The EM model of the WLE RF-MEMS switch is developed to estimate its RF performance. After the fabrication of the switch, the EM model is used to get accurate S-parameter simulation results. Alternativ

In this paper, design, implementation, and experimental results of efficient, high-power, and multi-octave gallium nitride-high electron mobility transistor power amplifier are presented. To overcome the low optima source/load impedances of a large transistor, various topologies of a broadside-coupled impedance transformer are simulated, implemented, and measured. The used transformer has a flat m

High-performance SiGe HBTs and advancements in packaging processes have enabled system-in-package (SiP) designs for millimeter-wave applications. This paper presents a 122-GHz bistatic frequency modulated continuous wave (FMCW) radar SiP. The intended applications for the SiP are short-range distance and angular position measurements as well as communication links between cooperative radar station

This paper presents the design and measurement results of a high-gain D-band broadband power amplifier (PA) implemented in a 130 nm SiGe BiCMOS technology. The topology of the PA is based on four differential cascode stages with interstage matching networks. A detailed analysis of the frequency behavior of the transimpedance-gain of the common-base stage of the cascode is presented by means of sma