International Journal

By introducing a modified F-shaped feeding strip and dual parasitic shorted strips, a small-size wireless wide area network/long-term evolution (WWAN/LTE) printed antenna is proposed and embedded in the 4 G mobile phone with octa-band operation. The operating impedance bandwidths (RL ? 6 dB) of 263/1093 MHz can be obtained across the LTE/WWAN bands, respectively. The overall antenna size of the pr

Active electronically scanned array (AESA) radar has large number of T/R) modules which require multiple microwave and digital signals. Distribution of these signals through conventional method such as coaxial cable, twisted pair, etc. not only introduces engineering complexities and signal loss but also have limitation of bandwidth, data rate, transmission distance, etc. This paper addresses desi

Since last decades, microwaves have received tremendous attention as an interesting tool for material characterization. In general, standard microwave measurement methods require cutting and polishing of samples to put it in a suitable waveguide or cavity. However, several methods have been developed in order to permit a non-destructive measurement. A well-known method is based on coaxial open-end

The development of compact radio frequency identification (RFID) tag is the key requirement for wireless tracking of precious small size goods/packages in transport. A design of compact meander line tag antenna having inductive coupling feed is presented for RFID system operating at ultra high frequency band of . The size of the proposed tag antenna is , and is designed using Higgs 4 IC chip (made

This paper presents a simple reconfigurable bandpass filter switching from to based on PIN diodes. The proposed filter is intended to add frequency-tunability to antenna systems used in cognitive radio applications. It consists of a bent connecting stub with two open-circuited quarter-wave stubs grounded via PIN diodes. By controlling the didoes states, the electrical length of the stubs can be

The design and analysis of meta-material inspired loaded monopole antenna for multiband operation are reported. The proposed antenna consists of multi resonators inspired from half mode composite right/left handed cells, which has a simple structure, compact size, and provides multiband functionalities. As a proof of concept, a triple band antenna covering all possible WiMAX operating bands, has b

In this paper, combination of electromagnetic band gap (EBG) and split-ring resonator (SRR) loads with fractal formation for miniaturization of microstrip antenna is noticed. Here two different shapes of antenna have been studied with two well-known metamaterial structures as parasitic elements. A conventional microstrip antenna, which is surrounded by four EBG unit cells, is chosen as the first a

A probe feed wideband multi-element dual segments quarter cylindrical dielectric resonator antenna (q-CDRA) in composite forms have been proposed. The q-CDRA has been introduced by splitting CDRA into four uniform quarters and multi-segmentation approach has been castoff for further improvement in bandwidth of q-CDRA. The dual segments q-CDRA has been designed and analyzed using theoretical analys

This paper presents the design of a split-ring resonators (SRR) loaded coplanar waveguide-fed ultra-wide band (UWB) antenna. As using the electromagnetic coupling SRR connected by open-ended microstrip lines, this UWB antenna achieves wide band-notched characteristics. The frequency of the proposed antenna operates from 2.37 to 10.93 GHz with a broad notch band covers from 4.96 to 6.15 GHz (IEEE 8

Compact modified T-slot circular patch antenna for multiple input multiple output MIMO) applications, which has good response for four operating frequency bands is developed. Here the design consists of a circular patch with a new slot loaded T- shape on one side of the substrate and a feeder line on the other side of the substrate. A shorting pin is located between the patch and the feeder line.