Find a document written by the best international scientists in our secure database.

24776 documents found.

Single layer single probe feed circularly polarized triple band fractal boundary microstrip antenna for wireless applications

Author: V.V. Reddy, N.V.S.N. Sarma

Triple band circularly polarized fractal boundary microstrip antenna is proposed and experimentally studied. The two orthogonal sides of the square patch are replaced with asymmetrical fractal curves for circular polarization (CP) radiation. A 45° rotated asymmetrical fractal slot is embedded at the center of the fractal patch for triband CP operation. The indentation factors of the fractal curves

The d-Radar: a bistatic system based on conformal arrays

Author: Gaspare Galati, Paola Carta, Mauro Leonardi, Francesco Madia, Rossella Stallone, Stefania Franco

Multifunction radars based on active phased arrays are well known and widely studied systems. The concepts of bistatic architecture, conformal array and digital beam forming (DBF) are combined in this paper to define a novel multifunction radar for point defense. The conical shape of the antenna overcomes the significant limitations in the azimuth coverage of 360° of fixed-faces phased arrays due

A printed wide-beamwidth circularly polarized antenna via two pairs of radiating slots placed in a square contour

Author: Neng-Wu Liu, Lei Zhu, Wai-Wa Choi

A low-profile circularly polarized (CP) slot antenna to achieve a wide axial-ratio (AR) beamwidth is proposed in this paper. The radiating patch consists of two orthogonal pairs of parallel slots etched symmetrically onto a ground plane. Firstly, our theoretical study demonstrates that the CP radiation can be satisfactorily achieved at the broadside, when the vertical and horizontal paired-slots a

Quarter cylindrical dielectric resonator antenna in multi-element composite form for wideband applications

Author: Pinku Ranjan, Ravi Kumar Gangwar

A novel quarter cylindrical dielectric resonator antenna (q-CDRA) has been introduced by splitting four uniform quarters from a cylinder. q-CDRA has been designed and validated with theoretical analysis. Two and four element q-CDRAs have been proposed in composite forms through Ansoft high-frequency structure simulator simulation software and fabricated for experimental investigation. The input ch

Omnidirectional multi-band stacked microstrip patch antenna with wide impedance bandwidth and suppressed cross-polarization

Author: Jaishanker Prasad Keshari, Binod Kumar Kanaujia, Mukesh Kumar Khandelwal, Pritam Singh Bakariya, Ram Mohan Mehra

In this paper, triple-band stacked microstrip patch antennas (MPAs) are presented with wide impedance bandwidth and suppressed cross-polarization level. Triangular and circular shaped slots are embedded in the patch of antenna. Slot-loaded microstrip patches are fed with meandered microstrip line supported by a semi-ground plane structure. Triangular shaped slot-loaded MPA shows triple resonance a

Low-profile U-shaped DRA for ultra-wideband applications

Author: Idris Messaoudene, Tayeb A. Denidni, Abdelmadjid Benghalia

In this paper, a microstrip-fed U-shaped dielectric resonator antenna (DRA) is simulated, designed, and fabricated. This antenna, in its simple configuration, operates from 5.45 to 10.8 GHz. To enhance its impedance bandwidth, the ground plane is first modified, which leads to an extended bandwidth from 4 to 10.8 GHz. Then by inserting a rectangular metallic patch inside the U-shaped DRA, the band

Design of ultra compact dual-band bandpass filter using -shaped resonator

Author: Yeganeh Pourasad, Gholamreza Karimi

A compact dual-band microstrip bandpass filter (BPF) is presented for application at the frequencies 2.4 and 5.84 GHz. The proposed main resonator consists of two L-shaped resonators. To improve the upper-stopband of the proposed filter, modified U-Shaped resonators are accepted. The operation mechanism of the filter is investigated based on proffered equivalent-circuit model and transformation fu

Neurospectral computation for the resonant characteristics of microstrip patch antenna printed on uniaxially anisotropic substrates

Author: Lamia Barkat, Sami Bedra, Tarek Fortaki, Randa Bedra

Modeling and design of rectangular microstrip patch printed on isotropic or anisotropic substrate are accomplished in this paper. The use of spectral domain method in conjunction with artificial neural networks (ANNs) to compute the resonant characteristics of rectangular microstrip patch printed on isotropic or anisotropic substrates. The moment method implemented in the spectral domain offers go

Study on miniaturization of planar monopole antenna with parabolic edge shape with a notch slot

Author: Tae-Soon Chang, Sang-Won Kang

This paper proposes a planar monopole antenna with a parabolic edge shape. This antenna, which has notch characteristics in the wireless local area network (WLAN) band, can be miniaturized. To obtain the notch characteristics in the WLAN band, a slot with a parabolic edge shape identical to that of the monopole structure was implemented. Because the planar monopole antenna with a parabolic edge sh

Miniaturized curved slotted patch antenna over a fractalized EBG ground plane

Author: Saurabh Kumar, Dinesh Kumar Vishwakarma

In this paper, a miniaturized coaxial feed curved-slotted microstrip patch antenna over a fractalized uniplanar compact electromagnetic bandgap (F-UC-EBG) ground plane is proposed and investigated. Compact size is achieved by cutting the curved slots along the orthogonal directions of the patch radiator. The curved-slotted microstrip patch antenna is 38.30% miniaturized as compared with the conven