Find a document written by the best international scientists in our secure database.

24776 documents found.

Convergence of FDTD and Wavelet-Collocation Modeling of Curved Dielectric Interface with the Effective Dielectric Constants Obtained by Static Field Analysis

Author: M. Fujii, D. Lukashevich, I. Sakagami, P. Russer

Convergence of FDTD and Wavelet-Collocation Modeling of Curved Dielectric Interface with the Effective Dielectric Constants Obtained by Static Field Analysis Masafumi Fujii, *Dzianis Lukashevich, Iwata Sakagami and *Peter Russer Dept. of Electrical, Electronic and System Engineering Toyama University, 3190 Gofuku, Toyama-shi, 930-8555 Japan Phone/Fax: (+81-76) 445 6762 email: mfujii@eng.toyama-u.a

Efficient Full-wave Modal Analysis of Arbitrarily Shaped Waveguides using BI-RME and Nyström Methods

Author: M. Taroncher, A. Vidal, V.E. Boria, S. Marini, P. Soto, S. Cogollos, B. Gimeno

Efficient Full-wave Modal Analysis of Arbitrarily Shaped Waveguides using BI-RME and Nyström Methods Máriam Taroncher1, Ana Vidal1, Vicente E. Boria1, Stephan Marini1, Pablo Soto1, Santiago Cogollos1, Benito Gimeno2 1 Departamento de Comunicaciones, Univ. Politécnica de Valencia, E-46022 Valencia, Spain, +34 963879718 2 Departamento de Física Aplicada y Electromagnetismo, Univ. de Valencia, E-461

Wavelets on Hybrid Grids for Moment Methods

Author: G. Schneider, H. Pawlak, A.F. Jacob

Wavelets on Hybrid Grids for Moment Methods Guido Schneider, Holger Pawlak, and Arne F. Jacob Institut f¨ r Hochfrequenztechnik, Technische Universit¨ t Braunschweig u a P. O. Box 3329, 38023 Braunschweig, Germany Phone: +49 531 391 2020, E-Mail: G.Schneider@tu-braunschweig.de Abstract-- The Method of Moments can significantly be accelerated by using wavelets as basis and testing functions. This

Modeling of Integrated Inductors with a Coplanar Ground Plane Using the PEEC Method

Author: P. Leduc, A. Schellmanns, D. Magnon, F. Guitton

Modeling of Integrated Inductors with a Coplanar Ground Plane Using the PEEC Method Philippe Leduc 1,2, Ambroise Schellmanns 1, Didier Magnon 1, Member, IEEE, Fabrice Guitton 2 2 Power Microelectronic Laboratory, Tours University, Application and System Engineering Laboratory, STMicroelectronics, Tours, 16 rue Pierre et Marie Curie, 37071 Cedex 2, France Fax : (+33)-247-424-937 E-mail : philippe.

Design and On-Wafer Measurement of a W-Band Via-Less CPW RF Probe Pad to Microstrip Transition

Author: G. Zheng, P. Kirby, A. Rodríguez, J. Papapolymerou, M. Tentzeris, L. Dunleavy

Design and On-Wafer Measurement of a W-Band Via-Less CPW RF Probe Pad to Microstrip Transition G. Zheng1, P. Kirby1, A. Rodríguez2, J. Papapolymerou1, M. Tentzeris1, and L. Dunleavy2 1 School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA 30332 USA zemily@ece.gatech.edu 2 Department of Electrical Engineering, University of South Florida, Tampa FL 33620 USA (

Low Cost Non Radiative Perforated Dielectric Waveguides

Author: N. Grigoropoulos, P.R. Young

Low Cost Non Radiative Perforated Dielectric Waveguides N. Grigoropoulos and P. R. Young Department of Electronics, University of Kent, Canterbury, CT 1 7NT, UK TeL: +44 1227 823290, Fax +44 1227456084 Email: ng8@kent.ac.uk.p.r.young@kent.ac.uk Abstract - This paper presents a low cost technique for fabricating Non Radiative Dielectric Waveguides (NRD). By using perforated dielectric substrates a

Co-integration of filters and waveguide to microstrip transitions using the foam technology

Author: C. Person, N. Caillère, J.P. Coupez, D. Lo Hine Tong, A. Louzir

Co-integration of filters and waveguide to microstrip transitions using the foam technology Christian Person1 , Noel Caillère1 , J.Ph. Coupez1 , D. Lo Hine Tong2 , A. louzir2 1 2 LEST/ENST B. - UMR 6165 - BP 832 - 29285 BREST Cedex ­ FRANCE - Christian.Person@enst-bretagne.fr THOMSON MULTIMEDIA R&D France, 1 av. Belle Fontaine, CS17616, 35576 Cesson Sévigné - France Abstract -- In this paper, w

Broad-Band Matching of Antennas using Dual-Mode Radiators

Author: I. Hunter

Broad-Band Matching of Antennas using Dual-Mode Radiators. Ian Hunter. Institute of Microwaves and Photonics, School of Electronic and Electrical Engineering, University of Leeds, Leeds LS29JT, UK, Tel [+44] (0)113 3432055, Fax [+44] (0)113 3432032, e-mail I.C.Hunter@ee.leeds.ac.uk Abstract -- This paper describes a new method for increasing the bandwidth of microwave antennas. This is achieved b

Two types of interconnection designs and measurements for broadband packaging

Author: C.A. Tavernier, V. Rodrigues, N. Célérier, F. Hosatte

Two types of interconnection designs and measurements for broadband packaging Christophe A. Tavernier1*, Victor Rodrigues2**, Nicolas Célérier2, Frédéric Hosatte1 2 EGIDE, egide@egide.fr, Trappes, 78190, France, ALCATEL OPTRONICS, optronics@alcatel.com, route de Villejust, Nozay, 91625 France 1 Abstract -- The present article contains the description of two types of wide band interconnections u

A 60 GHz Image Rejection Filter Manufactured Using a High Resolution LTCC Screen Printing Process

Author: I. Ferrer, J. Svedin

A 60 GHz Image Rejection Filter Manufactured Using a High Resolution LTCC Screen Printing Process Isabel Ferrer1, Jan Svedin1 1 Swedish Defence Research Agency, Dept. of Microwave Technology, P.O. Box 1165, SE-581 11 Linköping, Sweden Abstract An LTCC test panel including various mmwave test circuits has been designed and manufactured using a recently developed screen printing process (Thales Mi