International Journal

A 6?18 GHz high-power amplifier (HPA) design in GaN on SiC technology is presented. This power amplifier consists of a two-stage corporate amplifier with two and four transistors, respectively. It has been fabricated on UMS using their 0.25 µm gate length process, GH25. A study of the suitable attachment method and measurement on wafer and on jig are detailed. This HPA exhibits an averaged output

The next generation mobile communication systems impose challenging performance, size, and cost requirements on the power amplifiers (PAs). This paper presents novel DC-biasing circuits, which are compact and yet can control the harmonics almost arbitrarily. The proposed circuit consists of a composite right-/left-handed (CRLH) transmission line (TL) stub, of which the size and harmonics-control f

This paper presents a fully digital transmitter chain from baseband to antenna, including a modulator, two truly digital (i.e. fully switched) microwave power amplifiers and a transmit/receive switch. Both, amplifier and switch monolithic microwave integrated circuits were implemented in a GaN HEMT process. The novel amplifier design provides greatly reduced complexity, needing only three voltage

Nowadays, as indoor localization is getting more popular, there is a growing need for reliable and accurate techniques of position determination. Recently, ultrawideband (UWB)-based systems are gaining popularity, since they make achieving positioning errors in the range of dozens of centimeters or even single centimeters, possible. The Time Difference of Arrival (TDOA)-based systems are especiall

Novel designs of a circularly polarized 2 × 2 and 4 × 4 slot array antennas (CPSAAs) are proposed. Sequential phase feed network composed of a section of 270° and four strips is utilized to feed the array structures. Array elements are simple linearly polarized wide slot antennas (WSAs) composed of simple radiating patches with truncation on four corners and slotted ground plane on substrate backs

In this article, an extremely wideband, isolation-enhanced, low-profile ?Multiple-Input-Multiple-Output? (MIMO) antenna along with dual-band-notched features has been investigated. The antenna proposed herein, possesses two mutually orthogonal staircase-etched radiators for achieving a wide bandwidth. The radiating elements are placed mutually perpendicular in order to achieve polarization diversi

A compact planar ultra-wideband (UWB) antenna with WiMAX and WLAN notched band is presented in this paper. The presented antenna consists of a rectangular patch and slotted partial ground plane and fed by a microstrip feed line. The volumetric size of the antenna is 30 mm × 22 mm × 1.6 mm. Method of moment-based simulation technology is used to simulate and analyze the characteristics of the anten

This paper presents the design and analysis of a wideband X/Ku and Ku band reflectarray antenna. The proposed unit cell of the reflectarray antenna comprises a patch loaded with two distinct slots, viz. a square ring and a cross loop, printed on a low loss substrate, which is backed by a foam-loaded ground plane. The unit cell element offers a linear and large dynamic reflection phase range, which

A low profile super-wideband polarization diversity printed monopole antenna with dual band-notched characteristics is presented the first time. The designed antenna comprises two arched shaped radiating elements with two triangular tapered microstrip feed lines (TTMFL) and two arched shaped partial ground planes, which covers an enormously wide impedance bandwidth (BW) from 1.2 to 25 GHz (ratio B

In noise radar, digital signal processing algorithms for implementing the computation of the Cross Ambiguity Function through range correlation and Doppler compensation call for optimized solutions. In fact, to achieve a high coherent processing gain, they often compute a large amount of data beyond the maximum range and/or the maximum radial velocity of interest, adding useless information. A nov