International Journal

A compact multiple input multiple output (MIMO) antenna operating at 2.45 GHz industrial scientific and medical band is presented for wearable devices. Open-end slotting is used to miniaturize the antenna dimensions. Inverted U-shaped ground stub is incorporated to reduce mutual coupling. On-body performance is analyzed on a three-layered equivalent tissue phantom model. The wide bandwidth of 300

This paper reports an integration of dual band microstrip antenna with thin film amorphous silicon solar cell which creates a wearable system to harvest microwave energy. The multiple layers in the encapsulation of the thin film solar cell are used as a substrate for microstrip antenna. The rectifier and matching circuit are designed on cotton jeans material and the whole system is mechanically su

In this paper, dual-band and tri-band bandpass filters (BPFs) with fully independent and controllable passbands based on multipath-embedded resonators are presented. The dual-band BPF consists of two double open-ended stub-loaded terminal-shorted resonators (DOESL-TSRs) with a common via-hole connected along the symmetric plane of the filter. Based on DOESL-TSRs, a triple open-ended stub-loaded te

A novel waveguide resonator is proposed in the paper. The resonator is composed of three rectangular partial-height posts inserted along a rectangular waveguide cross-section. A pair of lateral posts is mounted symmetrically whereas the third antipodal post is centered. The resonator enables bandreject, singlet-type, and pseudoelliptic responses. The operating regimes are achieved by a manipulatio

Each of the various methods for mixed-mode load-pull measurements, which can be found in literature, has its own advantages and disadvantages. In this publication, we analyze two of the most commonly used setups and a third setup of which we provided an initial treatment in a previous publication. We investigated the impact of 180° hybrids on the tuning capabilities of a mixed-mode load-pull syste

The design of proper antenna element (AE) for microwave-based head imaging or brain stroke detection is a crucial challenge in the development process of microwave imaging (MWI) systems. The main purpose of this paper was to design, fabricate, and experimentally verify the compact and dimensions-reduced H-slot antenna suitable for the new generation of multichannel MWI system for brain stroke dete