International Journal

Designing miniaturized multiband antennas to cover both the 5G new radio frequencies (FR1 and FR2) simultaneously is a challenge for wireless communication researchers. This paper presents two antenna designs : a dual-band printed antenna of size 18 × 16 × 0.285 mm operating at FR1?5.8 GHz and FR2?28 GHz and a triple-band printed antenna with dimensions 30 × 25 × 0.543 mm operating at FR1?3.5 GHz

In this paper, an unconditionally stable time-domain method is proposed to investigate the external electromagnetic (EM) field illumination on the nonlinearly loaded transmission lines. In the proposed algorithm, the field to line coupling equations and linear/nonlinear boundary conditions are incorporated and expressed in a matrix form. The derived differential matrix equations are then discretiz

In this paper, an eight-shaped polarization-dependent electromagnetic bandgap (ES-PDEBG) structure is proposed. The unit cell of ES-PDEBG structure consists of an outer eight-shaped EBG patch with two inner square patches and three vias. Surface wave bandgap and reflection phase characteristics have been studied for the proposed structure. From the measurement results, two surface wave bandgaps wi

In this article, we present two efficient closed-form models to examine thoroughly the dependence of resonant frequency, quality factor, probe reactance, input impedance, bandwidth, and gain on parameters such as patch radius, probe location, substrate electrical parameters, and air gap of a coax probe-fed circular patch antenna. The implementation of these models is very easy and the computation

Despite the great progress in data transmission systems using dielectric waveguides (DWGs) in the millimeter-wave (mm-wave) frequency band (30?300 GHz), the signal distortions caused by DWGs have not yet been fully understood. However, such investigations would help to optimize DWGs as a transmission channel in order to further increase data rate and transmission distance of such systems without t

Realizing packaged state-of-the-art performance of monolithic microwave integrated circuits (MMICs) operating at millimeter wavelengths presents significant challenges in terms of electrical interface circuitry and physical construction. For instance, even with the aid of modern electromagnetic simulation tools, modeling the interaction between the MMIC and its package embedding circuit can lack t

In this paper, a semi-flexible 2 × 1 array antenna is proposed with epoxy glass fiber and graphene as patch and ground, respectively. Microstrip patch antenna with a center parasitic patch of half-wavelength and slot in the radiating patch have been incorporated for the bandwidth enhancement in order of 79.56% (2.21?5.13 GHz). The antenna has an overall size of 0.30 × 0.24 at a lower frequency of

This paper presents a 60 GHz connected slots linear-phased array feeding a high-gain semi-symmetric lens antenna. This design provides high gain, broadband, and beam-steering capabilities for gigabit rate access and backhaul communications. The connected slots antenna array (CSAA) is excited at 16× equidistant points which not only yields spatial power combining but also allows the progressive pha