International Journal

This paper reports a bi-port, wideband, parasitic-fed, single/shared patch antenna with enhanced interport isolation for 2.4 GHz in-band full duplex (IBFD) applications. The employed parasitic feeding provides comparatively the wider impedance bandwidth and better gain for the presented antenna. The improved self-interference cancellation (SIC) levels across the required bandwidth are obtained thr

In this work, a new structure for the implementation of inline pseudoelliptic waveguide filters using non-resonating modes, based on asymmetric iris coupled transverse rectangular ridge resonators has been proposed. The basic structure is comprised of a ridge that is always centered and transverse to the waveguide center axis and has the ability to create a transmission zero (TZ) above or below th

In this study, a dipole antenna is designed for real-time damage assessment, humidity, and temperature monitoring in reinforced and non-reinforced concrete structures. The antenna-based sensor is embedded into reinforced and non-reinforced concrete beams to assess electromagnetic measurements. Reflection parameter in dB values and resonant frequencies of the embedded antenna are evaluated to dete

This paper presents wideband split-ring antenna arrays based on substrate integrated waveguide (SIW) for Ka-band (26.5?40 GHz) applications. The antenna array is fed by a 2.92 mm coaxial connector (K-connector) and the power is equally distributed to each split-ring resonator. The designed coplanar waveguide (CPW), SIW, CPW-to-SIW transition, coaxial-to-CPW transition, and two-stage SIW power divi

A new wideband multiple-input/multiple-output (MIMO) antenna system able to operate in a frequency band ranging between 3.3 and 7.1 GHz is proposed for fifth-generation (5G) new radio applications for future smartphones. The design structure contains four pairs of compact microstrip-fed slot antennas, located at the corners of an FR-4 printed circuit board. Each pair of antennas consists of a radi

A circularly polarized stub-matched inverted L-shaped antenna for C-band applications is presented in this communication. Antenna parameters of inverted L-shape on the radiating patch and slits, notch, square strips and stub on the ground plane and the effect of these are analyzed. The proposed optimized antenna (A: 0.54 × 0.54 × 0.02 mm) is selected among antennas (A ? A) with 5.1 GHz design freq

Conventional multiband antennas suffer from strong interactions among different operating frequencies, complex configurations, low bandwidth, and reduced efficiencies. A design concept for a multibeam multiband antenna in wireless devices is proposed in this paper. The design concept provides a promising approach to augment transmission and reception. The principle of design involves a primary rad

A circularly polarized high-power antenna with higher-order mode excitation (TM) is presented in this paper. The proposed structure consists of metal plates placed on the conical horn antenna's aperture for achieving TM to circular polarized TE mode conversion at the output. The structure is simulated on CST Microwave Studio. The designed antenna exhibits high gain and a directive radiation patter