International Journal

In this work, we analyze the pressure sensing of a thin film molybdenum/aluminumnitride/molybdenum (Mo/AlN/Mo) microwave/RF MEMS filter fabricated by a simple technology. After an experimental characterization in a frequency range between 1 and 36 GHz, we focused on the piezoelectric effect due to the stress properties of the piezoelectric AlN layer by applying forces by means of weights. Variatio

A novel waveguide called multilayer porous waveguide (MPW) is proposed as microwave low-loss transmission lines. MPW is a fully rectangular dielectric waveguide composed of several periodically rectangular air gaps in a bulk dielectric that can be easily formed by placing several dielectric substrates in interval with air gaps. The loss and propagating characteristics of both TE and TM modes in MP

In this paper, problem of efficient representation of large database of target radar cross section (RCS) is investigated in order to minimize memory requirements and recognition search time, using a tree structured hierarchical wavelet representation. Synthetic RCS of large aircrafts, in the High Frequency (HF)?Very High Frequency (VHF) bands, are used as experimental data. Hierarchical trees are

This paper describes the design of a 12-monopole linear array to perform a radiation pattern in the array alignment plane. This antenna can be used for HyperLAN2 telecommunications in transit vehicles. The design is based on a rigorous method which synthesizes the feeds weights by considering the strong cumulative coupling between monopoles. The originality of this paper consists in considering th

This paper presents measured results for two-stage and three-stage high-voltage/high-power (HiVP) amplifiers implemented in a commercial 0.12 ?m silicon germanium (SiGe) heterojunction bipolar transistor (HBT) bipolar Complementary Metal Oxide Semiconductor (BiCMOS) process at millimeter wave. The HiVP configuration provides a new tool for millimeter-wave silicon designers to achieve large output

This paper reports on the potential of RF-MEMS technology based on aluminum nitride capacitive dielectric and nickel-suspended membranes to provide RF circuit functions in reconfigurable front-end radios. The RF performance of capacitive switches, distributed MEMS transmission lines (DMTLs) phase shifters for beam steering and tunable filters, including center frequency and bandwidth tuning of ban