International Journal

This paper presents a comprehensive study on the design of a 30 GHz, circularly polarized (CP), single horn-fed, metallic electromagnetic band gap (EBG) antenna. Three different approaches have been studied in order to create a 20 dBi antenna with an axial ratio (AR) lower than 1 dB over a 500 MHz bandwidth. Based on theoretical and experimental results, a conclusion is given on the best solution

This paper presents a design method of internally-matched packaged GaN high electron mobility transistors (HEMTs) for achieving not only high-efficiency and high-power performances but also a wide bandwidth and insensitivity to harmonic terminations in the S-band. The package and its internal matching networks are synthesized to confine the second harmonic impedances seen by the GaN die to high-ef

In this paper, a new way of obtaining a band rejection in a ultra wideband (UWB) filter using a uniplanar Electromagnetic bandgap (EBG) structure is reported. The EBG structure has a bandgap centered at 6.69 GHz which is almost 38% lower compared with the conventional uniplanar EBG of same dimensions. A one-dimensional EBG structure coupled with a microstrip line provides a narrow bandgap, which i

In this paper, the design and the measurements of three-dimensional through silicon vias (TSVs) based-integrated solenoids embedded within high-resistive silicon is presented. Prior to silicon implementation, a rigorous theoretical analysis is proposed to put in obviousness the advantages of using such coil architecture for L and S band applications. This analysis, demonstrates a clear reduction o

Time-domain characterization of a microstrip patch antenna with circular corner truncation to achieve polarization reconfigurability is presented. By applying zero bias, forward bias, and reverse bias to the four PIN diodes, the antenna can radiate with linear polarization (LP), right hand circular polarization (RHCP), and left hand circular polarization (LHCP). The circular cuts reduce centre-fre

With the ever-increasing need for wireless communication and the emergence of many systems, it is important to design broadband antennas to cover a wide frequency range. The aim of this paper is to design a broadband patch antenna, employing the three techniques of slotting, adding directly coupled parasitic elements and fractal electromagnetic band gap (EBG) structures.The bandwidth is improved f

A proximity-fed complementary Sierpinski gasket fractal with equilateral triangular shape resonator in multilayer structure to achieve dual-band behavior for WiMAX and WLAN applications has been proposed. An electromagnetic coupled stacked structure of two different patches operating at two frequencies (3.5 GHz WiMAX and 5.8 GHz wireless LAN) has been designed for dual-band wireless applications.

Electrodynamics models and radiophysical properties of carbon nanotube-dipoles (isolated on the substrate lattices), metallic optical antennas and optical antennas, formed from ZnO nanorods coated with metal films were developed and investigated. The models are based on numerically analytical solution of integrodifferential equations describing the diffraction of electromagnetic waves on impedance

This paper presents four continuously variable W-band phase shifters in terms of design, fabrication, and radiofrequency (RF) characterization. They are based on low-loss ridge waveguide resonators tuned by electrostatically actuated highly conductive rigid fingers with measured variable deflection between 0.3° and 8.25° (at a control voltage of 0?27.5 V). A transmission-type phase shifter based o

Fourth generation mobiles require multi-standard operating handsets with small physical size as well as increasing demand for higher data rates. Compact multi-band printed inverted-F antennas (IFA) for available wireless communications are proposed in this paper. New design of printed IFA based on uniplanar compact electromagnetic band-gap (EBG) structure concept is proposed. A printed-IFA with L-