International Journal

A novel planar printed phase shifter design is proposed in this paper. The design is developed with microstrip?conductor-backed coplanar waveguide? microstrip (MP?CBCPW?MP) transition line with different defected ground structures (DGS). The differential phase shift can be controlled by altering the DGS dimensions. Three prototypes with DGS dimensions 5 × 10, 10 × 20, and 10 × 30 mm, are employed

In this manuscript, serial-shunt of square ring resonators with step-impedance open circuited stub resonators to produce a new on-off switchable bandpass to bandstop response in the same ultra-wideband microstrip filter structure is proposed. The closed ring of series-shunt square ring resonators with a combine stubs are introduced to excite the bandpass response while bandstop characteristic exci

A 0.18 µm CMOS Binary Frequency Shift Keying Modulator with a novel frequency synthesizer structure is proposed in this paper. Based on an analog adder technique being the backbone of the synthesizer, this prototype demonstrates a compact modulator with low complexity, which achieves 1 Mbps at 400 MHz while dissipating 3.1 mW at 1.5 V supply. The proposed design is ideal for biomedical sensor netw

This paper proposes an efficient and fast analysis of substrate integrated waveguide (SIW) components using a new approach of the iterative method called WCIP, i.e. ?Wave Concept Iterative Process?. This method is based on the iterative resolution of waves between two domains. The first is the spectral domain. We use the Floquet?Bloch decomposition to describe all modes in the spectral domain. The

A novel multiport system, allowing for measurements of scattering parameters in over-two-octave frequency range is proposed. It is composed of two directional couplers and a standard 4 × 4 Butler matrix, and does not require any isolators. The presented system features a uniform power distribution providing the high precision of measurements, which can be further enhanced by a simple adjustment of

In this paper, a novel design and experimental study of microstrip-line-fed rhombus-shaped slot antenna is presented. The proposed antenna shows an ultra-wide band (UWB) operation with good impedance matching by choosing appropriate rhombus-shaped slot and feeding structure. The proposed antenna has a simple structure and compact size as compared with many reported antennas. The measured results v

This paper presents the performance study of a 248 GHz voltage-controlled hetero-integrated signal source using indium phosphide (InP)-on-bipolar complementary metal-oxide-semiconductor (BiCMOS) technology. The source consists of a voltage controlled oscillator (VCO) in 0.25 µm BiCMOS technology and a frequency multiplier in 0.8 µm transferred-substrate InP-heterojunction bipolar transistor techno

In this paper, a wideband two-segmented four-element triangular dielectric resonator antenna (TDRA) with coaxial probe feed has been proposed. The proposed antenna has been analyzed, optimized, and studied through Ansoft HFSS simulation software. The prototype of the proposed antenna has been fabricated and its input characteristics are measured with the help of R&S Vector Network Analyzer. Good a

To restrict electromagnetic interference at WiMAX (3.3?3.7 GHz) and wireless local area network (WLAN) (5.15?5.825 GHz) bands operating within ultra wide bandwidth (UWB) band, a novel design of lamp-shaped UWB microstrip antenna with dual band-notched characteristics is presented. The proposed antenna is composed of a lamp-shaped radiating patch with two rectangular ground planes on both the sides

Fractals have unique properties such as self-similarity and space-filling. The use of fractal geometry in antenna design provides a good method for achieving the desired miniaturization, multi-band, and wideband properties. In this communication, novel fractal geometry is proposed based on which a multiband antenna is designed. The proposed antenna has fractal patches which are shaped as different